INDUSTRIAL EPOXY FLOORS MISSOURI
Industrial Epoxy Floors Built for the Demands of the Job.
Surface Solutions installs professional-grade epoxy floor systems for industrial facilities across Missouri. Where floors take chemical spills, heavy equipment, forklift traffic, and round-the-clock use, the coating system has to be specified correctly from the start. We bring the same prep standards and product knowledge to every industrial project that we bring to every other job we take on.
Floor Systems Specified for Industrial Conditions
Industrial environments push floors harder than almost any other application. Chemical exposure, thermal cycling, heavy rolling loads, and the need for continuous operations mean there is no margin for a coating that fails ahead of schedule. We specify systems based on what the floor will actually face, not on what is easiest to sell or install.
We work directly with facility managers, operations teams, and plant owners across Missouri to assess the specific demands of each space and match the right system to those conditions. No guesswork, no one-size-fits-all approach. You'll know exactly what you're getting, why it was specified, and what to expect from it before we ever start.
Warehouse & Distribution
Warehouse and distribution floors face constant forklift traffic, pallet jack loads, and the wear of high-volume daily operations. A floor that degrades quickly creates safety hazards, increases maintenance costs, and disrupts the flow of work. We install high-build epoxy and polyaspartic systems engineered specifically for the load demands and traffic patterns of working warehouse environments.
-
High-build 100% solids epoxy basecoat for maximum compressive strength under rolling loads
-
Polyaspartic topcoat for abrasion resistance and long-term durability under forklift traffic
-
Line striping and safety marking systems integrated into the coating for OSHA compliance
-
Seamless surface that's easy to sweep, scrub, and maintain at scale
-
Moisture vapor barrier primer applied when needed to prevent delamination in slab-on-grade construction
-
Slip-resistant finish options for pedestrian traffic areas and loading zones
Manufacturing Facilities
Manufacturing floors deal with a combination of demands that few other environments match: chemical exposure, mechanical impact, thermal shock, and the need to keep operations running during installation where possible. We specify coating systems around the actual conditions on your floor, including the specific chemicals present, the equipment being used, and the cleaning protocols in place.
-
Chemical-resistant epoxy systems rated for the specific substances used in your facility
-
Impact and abrasion resistant formulas built for dropped tools, machinery vibration, and heavy equipment
-
Urethane cement overlay for areas subject to thermal shock and extreme temperature cycling
-
Phased installation planning available to minimize operational disruption
-
Cove base systems for wall-to-floor transitions in wash-down environments
-
Anti-static and ESD (electrostatic discharge) flooring options available for sensitive production areas
Food & Beverage Processing
Food and beverage processing environments require flooring systems that can withstand aggressive cleaning chemicals, continuous wet conditions, thermal shock from steam cleaning, and strict hygiene requirements. Urethane cement is the industry standard for these environments because it bonds directly to damp concrete, tolerates extreme temperature swings, and holds up under the kind of daily punishment that standard epoxy systems cannot.​​​​
​
In food service environments, the floor system has to perform under conditions that most coatings aren't designed We specify the system around what the floor will actually face, including cleaning protocols, drainage requirements and temperature exposure.
-
Urethane cement overlay for primary production and processing areas requiring thermal shock resistance
-
USDA and FDA compliant system options available for food contact zone environments
-
Seamless, non-porous finish that eliminates harboring points for bacteria and contamination
-
Cove base installation for sanitary wall-to-floor transitions
-
Slip-resistant texture profiles that hold up under wet conditions and meet safety requirements
-
Chemical resistant against acids, alkalis, oils, and cleaning agents used in food processing
Automotive & Fleet Maintnance
Fleet maintenance facilities and automotive service bays need floors that stand up to oil, transmission fluid, hydraulic fluid, road salt, and the constant movement of heavy vehicles. We install 100% solids epoxy basecoat systems with polyurea or polyaspartic topcoats rated specifically for automotive chemical exposure and vehicle loads. The result is a floor that cleans up fast, resists staining, and holds up under years of daily shop use.
-
100% solids epoxy basecoat for maximum chemical and abrasion resistance
-
Polyurea topcoat rated for heavy vehicle loads and automotive chemical exposure
-
Resists hot tire pickup, oil penetration, and road salt degradation
-
Decorative chip broadcast available for customer-facing service drive areas
-
Line striping and bay marking integrated into the coating system
-
Easy to pressure wash so fluids and chemicals wipe clean with no staining
Data Centers
Data center environments require flooring that is clean, low-dust, and resistant to the electrostatic discharge that can damage sensitive equipment. Standard concrete and many conventional coatings off-gas, generate particulate, and do not address ESD risk. We install sealed, low-emission epoxy systems with anti-static and ESD options specifically designed for the cleanliness and safety requirements of data center environments.
ESD (electrostatic discharge) epoxy flooring systems for equipment-sensitive environments Anti-static options that meet ANSI/ESD S20.20 standards where required
​
-
Low-VOC, low-emission formulas that meet data center air quality requirements
-
Seamless, dust-free surface that eliminates particulate from concrete degradation
-
Clean, professional finish compatible with raised floor systems and open floor environments
-
Moisture vapor barrier primer applied when needed to maintain a stable, sealed surface
Chemical & Industrial Plants
Chemical plant environments require flooring systems with verified resistance to the specific chemicals present on site. We work from safety data sheets and chemical exposure profiles to specify the correct system for each area of the facility. Secondary containment areas, chemical storage rooms, and production floors each have different requirements, and we approach them accordingly.​
​
-
Chemical-resistant epoxy and novolac systems for high-concentration acid and solvent exposure
-
Secondary containment coatings for storage areas and spill zones
-
System selection based on verified chemical resistance data, not general claims
-
Cove base and curb systems for full containment coverage
-
Seamless finish with no joints or seams for chemicals to penetrate
-
High-build systems available for added protection in extreme exposure environments
Why Industrial Clients Choose Surface Solutions
SYSTEMS SPECIFIED FOR THE ACTUAL CONDITIONS
​
Industrial floors fail when the coating system is chosen based on price or convenience rather than the real demands of the environment. We assess the specific chemical exposure, load profile, temperature range, and cleaning protocols before specifying anything. The system we recommend is the one the floor actually needs, not the easiest one to install.
USA-MADE EPOXY, FLAKE & ASPARTIC SYSTEMS
​
Our epoxy, flake, and aspartic coating systems are professional-grade, 100% solids formulas manufactured in the United States. No fillers, no water content, no shrinkage after cure. In industrial environments where coating failure has real operational consequences, the quality of the product matters. We use systems we can verify and stand behind.
PREP FIRST, EVERY TIME
​
The number one reason industrial coatings fail is inadequate surface preparation. Contamination, moisture, and an unprepared surface profile will cause even the best coating to delaminate. We diamond-grind every surface, fill cracks with professional polyurea filler, and apply a moisture vapor barrier primer when the slab requires it. No shortcuts, regardless of the size of the job or the schedule pressure we're working with.
We give you a straight read on what your floor needs. If it requires a more robust system for the conditions on site, we'll tell you. If a simpler system will perform just as well, we'll tell you that too.
SCHEDULING AROUND YOUR OPERATIONS
​​
Operational downtime in an industrial facility is expensive. We work with your team to develop an installation plan that minimizes disruption, whether that means phased section work, off-shift installation, or weekend scheduling. Missouri facility managers get honest timelines, direct communication, and a job we don't consider done until you've walked it and signed off.
OWNER ON EVERY JOB
​​
Surface Solutions is owner-operated. When you hire us, the owner shows up for the estimate, the prep, the application, and the final walk-through. That means consistent quality standards and a single point of accountability on every industrial project we take on.
Let's Talk About Your Facility
Industrial floor projects require the right assessment before anything else. We're happy to walk your facility, review the conditions, and give you a straight answer on what the job requires and what it will cost. No obligation, no pressure.